Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling the Remote Key for Battery Replacement

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Key

When the battery in the remote control runs out, it becomes impossible to open and close the doors remotely. Each remote contains a small battery that powers the transmitter's electronic circuit. These batteries are available at any supermarket. Fortunately, you can access the vehicle using the mechanical key. Replacing the battery is simple; use a small coin to pry open the base of the remote to separate the two plastic shells enclosing the transmitter, remove the battery, and replace it with a new one of the same specifications. Close the two shells by pressing them gently until they click into place.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Remote Key Battery on Peugeot 207
Replacing Remote Key Battery on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In today's guide, you will learn how to disassemble and replace the battery of the remote key for a Peugeot 207, but this also applies to other model…
How to Dismantle the Key Cover of a Peugeot 207
How to Dismantle the Key Cover of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Follow these steps to dismantle the remote key of a Peugeot 207: take your remote and press the release button of the metal key; once the metal key i…
How to replace the key shell of the Peugeot 207.
How to replace the key shell of the Peugeot 207.
Peugeot 207 (2006-2015 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the shell of the Peugeot 207 key. First, let's take our remote contr…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos