Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlamp Bulb on a Peugeot 5008

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

Today’s steps will show you how to remove and replace the front headlamp bulb on a Peugeot 5008, as well as on a 3008. First, open the bonnet of the vehicle and start by removing the bulb protection cap; then disconnect the electrical connector and unclip the metal spring to remove and replace the bulb with a new one, as shown in the video.

At this point, install the new dipped or main beam bulb with the same fitting; finally, refit the plastic light protection cap, checking its operation!


Updated on 1 September 2026 by ScegliAuto


Related tutorials

Peugeot 5008 (2009-2016 / MK 1) In this tutorial, you will learn how to remove and replace the front headlamp bulb on a Peugeot 5008 in simple and quick steps. First, open the bonne…
Peugeot 5008 (2017-2024 / MK 2) Let's see the procedure for removing and replacing the front headlamp bulb on a Peugeot 5008, as well as the 3008. First, open the bonnet of the vehi…
Peugeot 5008 (2009-2016 / MK 1) Here are the instructions for removing and replacing the front headlamp bulb on your Peugeot 5008. First, open the bonnet and remove the plastic cove…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos