Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Urea (AdBlue) Warning Light on a Peugeot?

Model: Peugeot Peugeot Various
Part: AdBlue warning light

Video tutorial

In this video, we see the Delphi tool, which guides us in solving the AdBlue reset issue on a Peugeot vehicle. You will need to press the following buttons: while the engine is running, turn off the engine for four seconds, and while the engine is off, press the accelerator pedal five times.

Restart the engine to reset the warning light. In some cases, this process may not be immediate and could take up to an hour to take effect; therefore, do not panic if the light does not turn off immediately, but be patient and wait.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light on a Peugeot Vehicle
How to Reset the AdBlue Warning Light on a Peugeot Vehicle
Peugeot Peugeot Various The procedure to reset the AdBlue warning light on a Peugeot vehicle is a simple and quick operation that can be done independently. Go to a parking …
How to Reset the AdBlue Warning Light on a Peugeot Vehicle?
How to Reset the AdBlue Warning Light on a Peugeot Vehicle?
Peugeot Peugeot Various In this video, you will see how to reset the AdBlue warning light on a Peugeot vehicle: first, fill the AdBlue tank (leaving a little air). Use quali…
How to Reset the AdBlue Warning Light on a Peugeot
Peugeot Peugeot Various The AdBlue warning light on a Peugeot vehicle illuminates when it is necessary to refill the liquid in the tank. To reset the warning light, turn on …

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos