Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : Disassembly of the Peugeot 3008 door panel.

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Door panel
Operation: Disassembly of the Peugeot 3008 door panel.

Today's guide will show us how to dismantle and replace the front door panel of the Peugeot 3008, following the instructions below. First, we open the front door and begin dismantling and removing the window switch panel, levering on the sides and disconnecting the electrical connector found underneath. Then, we unscrew all the fixing screws located on the sides of the panel, in order to detach and remove it, as shown in the video. At this point, we disconnect the opening handle cable, replacing the door panel if necessary, by applying the reverse procedure!


Posted on 16 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos