Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key for a Peugeot 108?

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Key

To program the key for a Peugeot 108, insert the key into the ignition and turn it to position two, then back to position one; after this, open and close the driver's door, leaving it open the second time. Then turn the key again and close and open the driver's door once more. This time, keeping it closed, turn the ignition key twice in the lock; after completing these steps, the procedure will be finished, and you can check the key's functionality.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Peugeot 108
How to replace the air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To correctly replace the engine air filter of your Peugeot 108, it only takes a few minutes. All you have to do is carefully read the following guide…
Position and function of the air conditioning pressure sensor on the Peugeot 108
Position and function of the air conditioning pressure sensor on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The air conditioning pressure sensor, also known as a pressure switch, is a fundamental component in the air conditioning system of our Peugeot 108: …
Replacing the Remote Key Battery of a Peugeot 108
Replacing the Remote Key Battery of a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) How to replace the battery in the key of a Peugeot 108? To replace the key battery, separate the plastic covers. Use a screwdriver to pry between the…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos