Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote control battery on the Peugeot 108?

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

Video tutorial

In this tutorial, you will see how to replace the remote control battery on the Peugeot 108, a very simple and quick operation. For this, you will need a small flathead screwdriver and a replacement CR2016 battery.

First, extend the emergency metal key by pressing the appropriate button, then insert the screwdriver into the indicated slot, lever it open, and unlock the rear cover. Next, remove the old battery, insert the replacement respecting the polarity, and reassemble everything following the reverse procedure.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

Replacing the Key Battery on the Peugeot 108 - Citroen C1
Replacing the Key Battery on the Peugeot 108 - Citroen C1
Peugeot 108 (2014-2021 / MK 1) In this short video, learn how to disassemble and replace the remote key battery on the Peugeot 108, as well as the Citroen C1. Take your remote cont…
Replacing the Remote Key Battery of a Peugeot 108
Replacing the Remote Key Battery of a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) How to replace the battery in the key of a Peugeot 108? To replace the key battery, separate the plastic covers. Use a screwdriver to pry between the…
Manual Procedure for Learning the Remote Control of a Peugeot 108
Manual Procedure for Learning the Remote Control of a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) This video shows the manual procedure for learning a remote control for a Peugeot 108. You will need the original remote and a new, unprogrammed one.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos