Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the outer plastic trim of the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Checks and maintenance

Today we will explain how to remove the outer plastic trim of the Peugeot 307. Its removal is an important operation to be carried out before removing or performing work on the exterior door of the car. To perform this operation we must: - close the front and rear doors of the car; - push the trim to the left; - remove the trim; Once the front trim is removed, we can proceed with the rear trim. To insert the trim, we must place it on the corresponding clips and press. During the removal operation, be careful not to damage the clips.

Posted on 28 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Parking Sensors on a Peugeot 307 CC
How to Replace the Parking Sensors on a Peugeot 307 CC
Peugeot 307 (2001-2009 / MK 1) To replace the parking sensors on a Peugeot 307 CC, use a tool to lever off the trim at the bottom of the rear bumper. Once the trim is removed, you …
How to Replace the Radio in a Peugeot 307
How to Replace the Radio in a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the radio in a Peugeot 307, insert the hook keys into the four holes located at the corners of the radio. This will allow you to extract t…
How to Replace the External Wing Mirror on a Peugeot 307
How to Replace the External Wing Mirror on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this tutorial, you will see how to replace the external wing mirror on a Peugeot 307, a very simple and quick operation that requires removing the…

    Frequently Asked Questions

    • 307 2001-2009 - Where is the oil pressure sensor located on the Peugeot 307? Read answer
    • 307 2001-2009 - How much does it cost to repair the roof of a Peugeot 307 Station Wagon? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos