|
Do it yourself
| |||
| ||||
How to remove the rearview mirror on the Peugeot 207
Model: Peugeot 207
MK 1
- Years 2006-2015
In this video we see how to remove the rearview mirror of the Peugeot 207: we start by removing the plastic cover from the outside that covers the fixing bolt, then we unscrew it with an allen key, which will allow us to remove the mirror group from the bodywork. Before that, we will have disconnected the electrical part from its socket, so that we can easily thread it. Unfortunately, to do this simple operation, it is necessary to remove the internal door panel, and this can be done by removing the electric window control, unscrewing the screws underneath, then removing the top part of the handle and unscrewing the screws underneath. In the lower part of the panel we will surely find at least another screw, then by levering with a suitable plastic tool, we will remove the panel: disconnect the electric window control and the panel is removed.
Posted on 1 June 2024 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 207
(2006-2015 /
MK 1)
This guide shows you the steps to remove and replace the external wing mirror of the Peugeot 207. First, move to the outside of the vehicle and caref…
Peugeot 207
(2006-2015 /
MK 1)
Today we will see the instructions that will allow us to disassemble and replace the external rearview mirror of the Peugeot 207. First of all, we op…
Peugeot 207
(2006-2015 /
MK 1)
How do you remove the internal rear-view mirror located above the windscreen of a Peugeot 207? Follow these steps: enter the vehicle, grasp the mirro…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.600
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
