Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Peugeot 208

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part: Service warning light

To reset the service indicator light related to the car maintenance on the Peugeot 208, you need to turn on the instrument panel and then press the button on the instrument panel until the reset is complete. Finally, turn off and turn on the instrument panel to finish resetting the indicator light. This operation should only be done after completing the car maintenance procedures. Incorrect execution of the procedure could cause issues with the vehicle, as resetting the indicator light does not eliminate the problem but is only the completion of the procedure.

Posted on 11 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the "Service" light on a Peugeot 208, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to acc…
How to reset the "Service" light on a Peugeot 208?
How to reset the "Service" light on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To reset the "Service" light on a Peugeot 208, follow these steps. First, make sure the key is in the "Off" position. Then, press and hold the button…
How to reset the "Service" light on a Peugeot 208?
How to reset the "Service" light on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the "Service" light on a Peugeot 208, start by turning on the instrument panel. Then, access the onboard computer using the buttons on the s…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos