Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change the gear knob on the Peugeot 206.

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Shifter boot

With heavy use, the gear knob of the Peugeot 206 can wear out and become unsightly, so it needs to be replaced; we can also take the opportunity to install a knob with a more attractive aesthetic, choosing it from the wide range available online. We firmly grip the old knob and pull upwards with force, until it comes off, then detach the base of the boot and remove it, take the new knob, attach the tip of the boot to the base of the new knob and insert it onto the gear lever, push it all the way down then complete the job by inserting the base of the boot into its housing.

Posted on 27 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Peugeot 206?
How to Replace the Gear Knob on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the gear knob on a Peugeot 206, remove the old knob from the gear lever by simply pulling it off. Next, ensure that the black spacer insid…
How to Replace the Gear Knob on a Peugeot 206?
How to Replace the Gear Knob on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the gear knob on a Peugeot 206, detach the clips at the base of the leather cover of the gear lever so that it can be fully lifted. Once t…
How to remove the gear knob of the Peugeot 206
How to remove the gear knob of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Removing the gear knob of the Peugeot 206 is a very simple operation to perform independently. To remove the gear knob, you need to lift the gear lev…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos