Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the rear taillight of the Peugeot 508 SW

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Tail light

In this short guide, we will see the steps on how to disassemble and replace the rear taillight and its bulbs of the Peugeot 508 SW. First, we open the rear trunk door and start removing the plastic cover found on the side of the luggage compartment, thus accessing the inside of the taillight; now we unscrew the plastic screw and disconnect the electrical connector of the bulbs, as shown in the video. At this point, we separate the bulb holder from the light fixture if we want to replace only the bulbs, or replace the entire rear taillight!

Posted on 3 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlamp Bulbs on a Peugeot 508?
How to Replace the Rear Headlamp Bulbs on a Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In this tutorial, you will see how to replace the rear headlamp bulbs on a Peugeot 508. This is a very simple and quick operation that requires remov…
How to Replace the Front Brake Pads on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Before starting, lift the front end of your Peugeot 508. Begin by removing the front wheel, unscrewing the bolts that secure the wheel to the hub. Ne…
Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This guide outlines the main steps for removing and replacing the front headlight bulb on the Peugeot 508, following the instructions below. First, o…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos