Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Piaggio Beverly 300?

Model: Piaggio Beverly 300
Part: Clock

Video tutorial

To set the clock on a Piaggio Beverly 300, you need to turn on the ignition so that you can use the controls located on either side of the handlebars: press and hold the MODE button on the right lever to make the hours start flashing. When they are flashing, you can modify them by quickly pressing the MODE button; by pressing and holding this button again, you will notice that the minutes will start to flash, which can now be adjusted in the same manner, and finally, turn off the ignition.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How do you set the clock on the Piaggio Beverly 300?
How do you set the clock on the Piaggio Beverly 300?
Beverly 300 To adjust the clock of the Piaggio Beverly 300, you need to turn on the instrument panel by inserting the ignition key into the appropriate slot: onc…
Headlight adjustment on Piaggio Beverly 300
Headlight adjustment on Piaggio Beverly 300
Beverly 300 Through this very useful video tutorial, we can see the entire operation necessary to adjust the headlight on a Piaggio Beverly 300/350. This operati…
Replacing the Battery of the Piaggio Beverly 300
Replacing the Battery of the Piaggio Beverly 300
Beverly 300 Briefly, we will see the instructions that will allow you to remove and replace the battery of the Piaggio Beverly 300 scooter. First, place the scoo…

How to Replace the Rear Brake Pads on a Benelli TRK 502X?

To replace the rear brake pads on a Benelli TRK 502X, loosen the screws that secure the corresponding caliper so that it can be detached from the brake disc: once the caliper is removed from its disc, you can proceed to detach it and remove the pin that secures the pads inside the caliper. At this point, you can remove the old pads from their seat to insert the new ones: these must be secured properly by positioning the caliper and checking that the brake is functioning.

Watch the video!


by ScegliAuto

More videos