Do it yourself
Frequently asked questions about cars and motorcycles

Mistakes not to make when driving a Piaggio Vespa

Model: Piaggio Vespa 50 Primavera
Part: Warning light – error code

Video tutorial

In this video we can see ten mistakes not to make when driving a Vespa, no matter what engine size it is: the first is never to rev it up when cold; WD 40 and Vespa don't get along; with Vespa you shouldn't travel at a constant speed, occasionally you should give it some gas to lubricate; never change gears in a curve, as it may not engage and you could fall; we should frequently check tire pressure, which is 1.3 in the front and 1.8 in the rear (2.3 if traveling with a passenger); never park leaning to the right as it can get stuck: the gas tank is on the left and you would have to kick the kickstarter to restart it. Never lower the stand while already seated on the Vespa, as it strains the footrest which bends.

Remember to always carry tools for small repairs along the road; never drive without the tunnel shield, as it can cause carburetion problems.

Pay attention to where we put the rag we all keep under the seat, as it can be placed in an area that damages the carburetion.


Posted on 15 March 2025 by ScegliAuto


Related tutorials

Vespa 50 Primavera Changing the engine oil in the Piaggio Vespa 50 Primavera scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait…
Vespa 50 Primavera The Piaggio Vespa scooter, in all its versions, is widely known around the world, but for those who may have doubts about the model mentioned here, h…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Engine from a Suzuki GSX-R 1000?

To replace the engine on a Suzuki GSX-R 1000, loosen the bolts securing the engine to its mounting point in the centre of the frame. To do this, disconnect the intake and exhaust headers and also disconnect the relevant connectors. Then, loosen the bolts securing the cylinder head and cylinder to detach the pistons inside. Access the components near the crankshaft for potential replacement and reassemble after closing the engine block.

Watch the video!


by ScegliAuto

More videos