Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to top up the oil of the Roll Lock on the Piaggio MP3, you will need to loosen the screws that secure the front fairing of the motorcycle to its housing, so that it can be completely detached: once this panel has been removed, you will be able to locate the roll lock and therefore also remove the respective cap. In this way, you can insert the necessary amount of oil inside it; at the end of the top-up, you can close everything by inserting the cap and then repositioning the panel to ensure that everything is functioning properly.

Posted on 27 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Checking the oil level of the Piaggio MP3 300 roll lock
Checking the oil level of the Piaggio MP3 300 roll lock
Mp3 500 To check the oil level of the Roll Lock system of the Piaggio Mp3 500, we need to get a Torx 20 screwdriver, a Torx 30 screwdriver, and a 4mm Allen k…
How to Replace the Gearbox Oil of the Piaggio Mp3 500
How to Replace the Gearbox Oil of the Piaggio Mp3 500
Mp3 500 This guide provides the necessary instructions for replacing the gearbox oil of the Piaggio Mp3 500 scooter. First, place the scooter on its central …
How to Change the Engine Oil and Oil Filter of the Piaggio MP3 500
How to Change the Engine Oil and Oil Filter of the Piaggio MP3 500
Mp3 500 Regular maintenance servicing is essential to ensure the engine operates correctly; here’s how to change the engine oil and oil filter on the Piaggio…

How to Replace the Headlight Bulb on the Keeway RKS 125?

In this tutorial, we will see how to replace the headlight bulb on the Keeway RKS 125, a very simple and quick operation. First, ensure that the instrument panel is off to operate safely, then unscrew the two bolts of the handlebar using an Allen key. Next, unscrew the bolts located at the front of the instrument panel with a socket wrench, move the headlight unit forward and disconnect the power connector. At this point, simply remove the rubber cap, unclip the metal clip, replace the bulb, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos