Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking the Oil Level of the Roll Lock on the Piaggio MP3 300

Model: Piaggio Mp3 500
Part: Checks and maintenance

Video tutorial

To check the oil level of the Roll Lock system on the Piaggio MP3 500, obtain a Torx 20 screwdriver, a Torx 30 screwdriver, and a 4 mm Allen key. Start by removing the glove compartment above the dashboard by unscrewing the two screws inside. Use the Allen key to unscrew the four screws securing the windscreen and remove it. Detach the trim between the headlights, unscrew the two screws at the base of the position light, and the four at the base of the dashboard cover.

Remove the position lights and unscrew the two screws that are revealed, then take off the dashboard cover. You can now see the Dot4 fluid reservoir and check its level; if necessary, top it up, which may not be very easy, and reassemble everything by reversing the steps.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How do you top up the Roll Lock oil on the Piaggio MP3?
How do you top up the Roll Lock oil on the Piaggio MP3?
Mp3 500 In order to top up the oil of the Roll Lock on the Piaggio MP3, you will need to loosen the screws that secure the front fairing of the motorcycle to…
How to Change the Engine Oil and Oil Filter of the Piaggio MP3 500
How to Change the Engine Oil and Oil Filter of the Piaggio MP3 500
Mp3 500 Regular maintenance servicing is essential to ensure the engine operates correctly; here’s how to change the engine oil and oil filter on the Piaggio…
How to Replace the Gearbox Oil of the Piaggio Mp3 500
How to Replace the Gearbox Oil of the Piaggio Mp3 500
Mp3 500 This guide provides the necessary instructions for replacing the gearbox oil of the Piaggio Mp3 500 scooter. First, place the scooter on its central …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos