Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gearbox Oil of the Piaggio Mp3 500

Model: Piaggio Mp3 500
Part: Transmission fluid

Video tutorial

This guide provides the necessary instructions for replacing the gearbox oil of the Piaggio Mp3 500 scooter. First, place the scooter on its central stand and start by unscrewing the oil drain bolt located under the gearbox cover, allowing it to drain into a container for about ten minutes; then unscrew the fill screw to let the oil flow out more quickly.

At this point, top up with new gearbox oil of the correct viscosity (as indicated in the scooter's user and maintenance manual)!


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission on the Piaggio MP3 500?
How to Replace the Transmission on the Piaggio MP3 500?
Mp3 500 To replace the transmission on the Piaggio MP3 500, loosen the bolts securing the cover located on the left side of the scooter, near the rear wheel.…
How to Change the Engine Oil and Oil Filter of the Piaggio MP3 500
How to Change the Engine Oil and Oil Filter of the Piaggio MP3 500
Mp3 500 Regular maintenance servicing is essential to ensure the engine operates correctly; here’s how to change the engine oil and oil filter on the Piaggio…
How to Change the Engine Oil of the Piaggio MP3 500
How to Change the Engine Oil of the Piaggio MP3 500
Mp3 500 Briefly, we will cover the necessary operation to perform the routine maintenance service by replacing the engine oil and oil filter of the Piaggio M…

How to Replace the Rear Brake Pads on a Benelli TRK 502X?

To replace the rear brake pads on a Benelli TRK 502X, loosen the screws that secure the corresponding caliper so that it can be detached from the brake disc: once the caliper is removed from its disc, you can proceed to detach it and remove the pin that secures the pads inside the caliper. At this point, you can remove the old pads from their seat to insert the new ones: these must be secured properly by positioning the caliper and checking that the brake is functioning.

Watch the video!


by ScegliAuto

More videos