Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the storage compartment drawer of the Piaggio Vespa GTS 300

Model: Piaggio Vespa Gts 300

Video tutorial

Below we will see step-by-step instructions on how to disassemble and replace the storage compartment drawer of the Piaggio Vespa GTS 300 scooter. First, put the center stand and start unscrewing the fixing screws of the plastic covers located above the storage compartment drawer; then unscrew the screws found below and inside the storage compartment drawer, as shown in the video.

At this point, gently detach the drawer on the sides until it is completely removed, disconnecting the cable at the back; replace it with the new one and reassemble everything!


Posted on 29 May 2025 by ScegliAuto


Related tutorials

Fuses Location and Diagram for Piaggio Vespa GTS 300
Fuses Location and Diagram for Piaggio Vespa GTS 300
Vespa Gts 300 Today's instructions will illustrate the location and diagram of the fuse box for the Piaggio Vespa GTS 300 scooter. First, place the scooter on its …
Where is the fuse box on the Piaggio Vespa GTS 300?
Where is the fuse box on the Piaggio Vespa GTS 300?
Vespa Gts 300 This brief and simple guide shows you where to find the fuse box on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, open …
How to Replace the Coolant in the Piaggio Vespa GTS 300
How to Replace the Coolant in the Piaggio Vespa GTS 300
Vespa Gts 300 Below are the steps to drain and subsequently refill the coolant on the Piaggio Vespa GTS 300 scooter. First, place the scooter on the centre stand a…

How to Change the Engine Oil on the BMW K1600?

To carry out the engine oil change on the BMW K1600, you need to loosen the drain plug of the oil sump, which is located at the central bottom of the vehicle: once this plug has been unscrewed, you can collect all the used oil in a suitably positioned container. At this point, you can remove the oil filter from its housing on the right side of the bike; after removal, you can top up through the breather located on the right side of the bike. Once topping up is complete, ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos