Do it yourself
Frequently asked questions about cars and motorcycles
In this video, we see how to remove the rear wheel on a Vespa Piaggio: first of all, we remove the spare wheel by lifting the seat and removing the left cover, exposing the spare wheel, which we will remove with a 13mm wrench. To lift the scooter, we will need 3 wooden planks and an empty paint can. We then remove the wheel to be replaced, and take the opportunity to clean the hub with a degreaser, placing a basin underneath. We then mount the spare wheel, tightening the bolts and applying grease to the pins; we place the punctured wheel in place of the spare one, remove the supports on which we had placed the scooter, put the left cover back in place, and lower the seat.

Posted on 1 June 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Vespa Px 150 In this short and simple guide, you will learn how to remove and replace the front suspension on a Piaggio Vespa PX 150, as well as on an LML Star 15…
Vespa Px 150 It will be possible to replace the exhaust of the Piaggio Vespa PX 150 by loosening the screws that secure the rear wheel covering panel on the left …
Vespa Px 150 The oil change of the Piaggio Vespa PX 150 transmission can be carried out by loosening the drain plug of the transmission case, which will be locate…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos