Do it yourself
Frequently asked questions about cars and motorcycles
To change the headlight bulb of the Piaggio Liberty, start by removing the windshield, if installed, then unscrew the two side mirrors. Unscrew the three screws located on the back of the front panel and the one below the headlight: you can remove the body part that includes the headlight. Disconnect the electrical connector and remove the rubber protection of the bulb, remove it and replace it with a new one, being careful not to touch the glass with bare fingers, put back the protection and the connector. Position the headlight and secure it with the screws, reassemble the mirrors and the windshield if necessary.

Posted on 9 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Liberty Good morning, today's goal is to replace the engine oil of our Piaggio Liberty. Let's start by warming up the engine for 5 minutes, in order to fluid…
Liberty In order to install the stand on the Piaggio Liberty, you need to use an object to lever off the side panel on the left side of the footrest compartm…
Liberty To install the windscreen on the Piaggio Liberty, insert the large bush, the ring, and then the pin onto the mounting bracket, finally adding the bol…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos