Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Mp3 300
Part: Clock

These short and simple steps will show us how to adjust the time on the display of the instrument panel of the Piaggio MP3 300 scooter. First, put the scooter on the center stand and start the instrument panel; then press and hold the left button of the panel until the time display starts flashing, as shown in the video. At this point, use the right button to change the hour first, then switch to the minutes with the left button; repeat the operation and then exit the setting, saving the changes!

Posted on 13 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on the Piaggio MP3 300 HPE
How to set the clock on the Piaggio MP3 300 HPE
Mp3 300 Today's instructions will allow us to change the time on the display of the instrument panel of the Piaggio MP3 300 HPE scooter. First, we put the sc…
How to Set the Clock on Piaggio MP3 300
How to Set the Clock on Piaggio MP3 300
Mp3 300 Below are the steps to set the clock on the display of the instrument panel of the Piaggio MP3 300 scooter. First, place the scooter on the centre st…
How to reset the service light on the Piaggio MP3 300
How to reset the service light on the Piaggio MP3 300
Mp3 300 Let's find out how to reset the maintenance service light for the regular oil change of the Piaggio MP3 300 scooter. First of all, put the scooter on…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos