Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Piaggio MP3 300

Model: Piaggio Mp3 300
Part: Headlight bulb

Video tutorial

Below, you will see how to disassemble and replace the headlight bulb on the Piaggio MP3 300 scooter by following these simple steps. First, place your scooter on the centre stand and start by removing the windscreen by unscrewing the screws; then remove the plastic panels on the sides to unscrew the screws of the headlight unit and remove it, as shown in the video.

At this point, disconnect the electrical connector of the bulb to remove it and replace it with the new one, having the same fitting, finally reassembling the headlight unit and the windscreen!


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Piaggio MP3 300.
How to replace the headlight bulb of the Piaggio MP3 300.
Mp3 300 Today we will explain how to replace the front light bulb of the Piaggio MP 3 300. To carry out the bulb replacement, we need to use a 25mm Torx key …
How to Replace the Rear Brake Pads on a Piaggio MP3 300?
How to Replace the Rear Brake Pads on a Piaggio MP3 300?
Mp3 300 To replace the rear brake pads on a Piaggio MP3 300, loosen the bolts securing the wheel to the corresponding hub. Once the wheel is removed, loosen …
How to Set the Clock on Piaggio MP3 300
How to Set the Clock on Piaggio MP3 300
Mp3 300 Below are the steps to set the clock on the display of the instrument panel of the Piaggio MP3 300 scooter. First, place the scooter on the centre st…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos