Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will explain how to replace the front light bulb of the Piaggio MP 3 300. To carry out the bulb replacement, we need to use a 25mm Torx key and a 30mm Torx key. Using the 25mm Torx key, we remove the scooter's shield to gain access to the headlights. After removing the shield, we take out the screws on the headlights so that we can disconnect the bulb from the connector and proceed with the replacement. We insert the new bulb into the headlight and proceed to mount the headlight back in its housing and reattach the shield. We check the bulb's operation by turning on the scooter's lights.

Posted on 29 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the Piaggio MP3 300
How to Replace the Headlight Bulb on the Piaggio MP3 300
Mp3 300 Below, you will see how to disassemble and replace the headlight bulb on the Piaggio MP3 300 scooter by following these simple steps. First, place yo…
How to Replace the Rear Brake Pads on a Piaggio MP3 300?
How to Replace the Rear Brake Pads on a Piaggio MP3 300?
Mp3 300 To replace the rear brake pads on a Piaggio MP3 300, loosen the bolts securing the wheel to the corresponding hub. Once the wheel is removed, loosen …
How do you replace the battery of the Piaggio MP3 300?
How do you replace the battery of the Piaggio MP3 300?
Mp3 300 To replace the battery of the Piaggio MP3 300, you will need to open the underseat compartment, using the appropriate key and lifting the seat itself…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos