Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Mp3 300
Part: Clock

Today's instructions will allow us to change the time on the display of the instrument panel of the Piaggio MP3 300 HPE scooter. First, we put the scooter on the stand and start the instrument panel; then we press and hold the right button of the instrument panel until we enter the clock setting (we will see the voice flashing), as shown in the video. At this point, we change the hour first and then the minutes, finally exiting the settings and starting the engine to save the changes made to the clock.

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on Piaggio MP3 300
How to Set the Clock on Piaggio MP3 300
Mp3 300 Below are the steps to set the clock on the display of the instrument panel of the Piaggio MP3 300 scooter. First, place the scooter on the centre st…
How to set the time on the Piaggio MP3 300
How to set the time on the Piaggio MP3 300
Mp3 300 These short and simple steps will show us how to adjust the time on the display of the instrument panel of the Piaggio MP3 300 scooter. First, put th…
How to reset the service light on the Piaggio MP3 300
How to reset the service light on the Piaggio MP3 300
Mp3 300 Let's find out how to reset the maintenance service light for the regular oil change of the Piaggio MP3 300 scooter. First of all, put the scooter on…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos