Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the side fairing of the Piaggio Vespa 150 LX

Model: Piaggio Vespa 150 Lx
Part:

Video tutorial

In this short and simple guide, we will see step-by-step instructions on how to disassemble and replace the side fairing, engine side, of the Piaggio Vespa 150 LX scooter. First, we put the scooter on the center stand and start unscrewing the two screws inside the air intakes; then we remove the lower plastic cover and then remove the fairing (unscrewing the upper fixing screws).

In the same way, we will also remove the other side fairing; we then carry out the repair or replacement of the fairings, fixing them again with the original screws.


Posted on 20 July 2025 by ScegliAuto


Related tutorials

How to Replace the Drive Belt on a Piaggio Vespa 150 LX
How to Replace the Drive Belt on a Piaggio Vespa 150 LX
Vespa 150 Lx This guide explains how to remove and replace the drive belt on a Piaggio Vespa LX 150, following the instructions below. First, place the central st…
How to disassemble the rear wheel of the Piaggio Vespa 150 LX
How to disassemble the rear wheel of the Piaggio Vespa 150 LX
Vespa 150 Lx The steps outlined in this guide will show us how to disassemble and replace the rear wheel and tire on the Piaggio Vespa 150 LX. First, we put the s…
How to adjust the carburetion of the Piaggio Vespa 150 LX
How to adjust the carburetion of the Piaggio Vespa 150 LX
Vespa 150 Lx Today's video will show us how to perform basic carburetion on the Piaggio Vespa 150 LX scooter, following the instructions below. First, we put the …

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos