Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Mp3
Part: Wheel

In this video we see how to remove the pin from the rear wheel of the Piaggio MP3: with a pointed pliers, we remove the pin that holds the rear wheel nut of the vehicle in place. Of course, we must have engaged the scooter's parking brake, or we run the risk of it slipping away, as it does not need a stand to stay upright. Unfortunately, the pin will need to be replaced because it often gets damaged during disassembly. Of course, this piece can be easily found online, but its low price does not make it cost-effective to purchase - unless other parts need to be purchased at the same time - because the shipping costs are much higher than the value of the piece. Otherwise, we recommend purchasing it at a physical store.

Posted on 30 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Wheel Bearing on the Piaggio MP3
Replacing the Front Wheel Bearing on the Piaggio MP3
Mp3 In this video tutorial, learn how to replace the front wheel bearing on the Piaggio MP3 scooter. First, place the central stand on your scooter and b…
Removing the Rear Wheel of the Piaggio MP3
Removing the Rear Wheel of the Piaggio MP3
Mp3 In this brief and simple guide, follow the instructions to remove and replace the rear wheel of the Piaggio MP3 scooter. First, place the scooter on …
How to Replace the Rear Light Bulb on the Piaggio MP3
How to Replace the Rear Light Bulb on the Piaggio MP3
Mp3 In this short and simple guide, see how to remove and replace the rear light bulb of the Piaggio MP3 scooter, following the instructions below. First…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos