Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Piaggio MP3 300

Model: Piaggio Mp3 300
Part: Service warning light

Video tutorial

Let's find out how to reset the maintenance service light for the regular oil change of the Piaggio MP3 300 scooter. First of all, put the scooter on the center stand and start by pressing and holding the mode button located on the right side of the handlebar; then turn on the instrument panel, waiting for the service light to flash until it resets completely on the instrument panel, as shown in the video.

At this point, turn off the panel and start the engine to complete the oil change light reset operation!


Posted on 10 August 2025 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on the Piaggio MP3
How to Reset the Maintenance Light on the Piaggio MP3
Mp3 300 In this video tutorial, you will see how to reset the maintenance light on your Piaggio MP3 300. The procedure is very simple and does not require sp…
How do you replace the battery of the Piaggio MP3 300?
How do you replace the battery of the Piaggio MP3 300?
Mp3 300 To replace the battery of the Piaggio MP3 300, you will need to open the underseat compartment, using the appropriate key and lifting the seat itself…
How to set the time on the Piaggio MP3 300
How to set the time on the Piaggio MP3 300
Mp3 300 These short and simple steps will show us how to adjust the time on the display of the instrument panel of the Piaggio MP3 300 scooter. First, put th…

How to Replace the Headlight Bulbs on the Triumph Speed Triple 765 R?

In this tutorial, you will see how to replace the headlight bulbs on the Triumph Speed Triple 765 R, a very simple and quick operation. First, ensure that the key is not inserted, then locate the large cap at the back of the headlight and remove it by turning it counterclockwise. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos