Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Piaggio MP3

Model: Piaggio Mp3 300
Part: Warning light – error code

Video tutorial

In this video tutorial, you will see how to reset the maintenance light on your Piaggio MP3 300. The procedure is very simple and does not require specific tools or software. To reset the light, insert the key, press and hold the button on the right of the dashboard, while keeping it pressed, turn on the ignition and wait until the maintenance light, which looks like a spanner, disappears.

At this point, you can restart the dashboard to check that the procedure has been completed correctly and that the light is no longer present on the dashboard.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Piaggio MP3
Resetting the Service Light on the Piaggio MP3
Mp3 300 As the time for a service on the Piaggio MP3 approaches, a spanner icon appears on the speedometer display to remind you. After completing all the ma…
How to reset the service light on the Piaggio MP3 300
How to reset the service light on the Piaggio MP3 300
Mp3 300 Let's find out how to reset the maintenance service light for the regular oil change of the Piaggio MP3 300 scooter. First of all, put the scooter on…
Engine Oil and Oil Filter Replacement for the Piaggio MP3 300
Engine Oil and Oil Filter Replacement for the Piaggio MP3 300
Mp3 300 Today’s guide will show you how to perform routine maintenance by replacing the engine oil and oil filter on the Piaggio MP3 300 scooter. First, plac…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos