Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you install the front luggage rack on the Piaggio Vespa Sprint 150?

Model: Piaggio Vespa Sprint 150
Part:

Video tutorial

In order to install the front rack on the Piaggio Vespa Sprint 150, you will need to use a tool like a screwdriver to pry off the central panel of the motorcycle's front end. Once this has been removed, you will need to drill threaded holes in it at the corresponding attachment points below.

This will allow you to reposition the panel and also place the rack in position: it can now be secured with bolts that must pass through the holes in the panel and be fastened to the underlying attachments.

Finally, everything can be secured by inserting nuts.


Posted on 5 October 2025 by ScegliAuto


Related tutorials

How do you replace the air filter of the Piaggio Vespa Sprint 150?
How do you replace the air filter of the Piaggio Vespa Sprint 150?
Vespa Sprint 150 The air filter of the Piaggio Vespa Sprint 150 can be replaced by loosening the screws that secure the filter box near the rear wheel, on the left si…
How do you set the clock on the Piaggio Vespa Sprint 150?
How do you set the clock on the Piaggio Vespa Sprint 150?
Vespa Sprint 150 To adjust the clock of the Piaggio Vespa Sprint 150, you need to turn on the dashboard by inserting the ignition key into the corresponding slot: onc…
How to replace the transmission on the Piaggio Vespa Sprint 150?
How to replace the transmission on the Piaggio Vespa Sprint 150?
Vespa Sprint 150 You can replace the transmission on the Piaggio Vespa Sprint 150 by loosening the screws that secure the dedicated cover located at the rear wheel. O…

How to Remove the Engine from the KTM XC-W 300?

To remove the engine from the KTM XC-W 300, loosen the bolts that secure it to its housing in the centre of the frame: once the support bolts are removed, proceed to loosen the bolts securing the exhausts and then disconnect all related connectors. At this point, remove the pin and ring that secure the piston to the connecting rod: you can now access the crankshaft and all other internal components. After any necessary replacement, reassemble the engine to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos