Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. : Vespa Gtv 250

How to replace the rear brake pads on the Piaggio Vespa GTV 250 scooter?

Model: Piaggio Vespa Gtv 250
Part: Brake pads

Video tutorial
Detailed instructions - In this tutorial, we can see how to replace the rear brake pads on the Piaggio Vespa GTV 250 scooter, a very simple operation. First, we lift the scooter onto a stand, then we remove the exhaust terminal, disconnect the shock absorber, and then also remove the right swingarm. Next, we remove the wheel, unscrew the caliper mounting bolts, and separate the caliper from the bracket. At this point, we just need to extract the central pin, remove both the clip and the old pads, place the new parts, and reassemble everything following the reverse procedure.

Posted on 26 January 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a Piaggio Vespa GTV 250
How to Replace the Rear Brake Pads on a Piaggio Vespa GTV 250
Vespa Gtv 250 You can replace the rear brake pads on the Piaggio Vespa GTV 250 by loosening the screws that secure the rear wheel corresponding to its housing. Thi…

How to Change the Engine Oil on a KTM 690

To change the engine oil on a KTM 690, start by warming up the engine for a few minutes to thin the oil. Turn off the engine and place the bike on a central stand for stability. Locate the oil drain plug underneath the engine. Position a collection bowl under the plug, then use an appropriate spanner to unscrew the drain plug and let the oil fully drain into the bowl. Once all the oil has drained, securely reattach the drain plug. Find the oil filler cap located on the side of the engine. Remove the cap and use a funnel to slowly pour in the recommended amount of new engine oil as stated in the owner's manual. Ensure you do not exceed the maximum level indicated. After filling with new oil, replace the filler cap and tighten it well. Start the engine for a few minutes and check for any oil leaks.

Watch the video!


by ScegliAuto

More videos