Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Gts 125
Part: Key

Below are the instructions that will allow us to disassemble and replace the battery in the key fob for the Piaggio Vespa GTS 125. First, take your key fob and start by removing the upper plastic cover; then, use a lever on the gap created to open the fob into two parts, giving access to the electronic board and the battery, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type and with the same code; insert it the right way round and reassemble the key fob!

Updated on 29 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
Vespa Gts 125 Below we will see the instructions that will allow us to adjust the stiffness of the rear suspension of the Piaggio Vespa GTS 125 scooter, but also o…
Replacing the Spark Plug on the Piaggio Vespa GTS 125
Replacing the Spark Plug on the Piaggio Vespa GTS 125
Vespa Gts 125 In today's tutorial, you will learn how to remove and replace the engine spark plug on the Piaggio Vespa GTS 125, following the instructions below. F…
How do you replace the battery of the Piaggio Vespa GTS 125?
How do you replace the battery of the Piaggio Vespa GTS 125?
Vespa Gts 125 In order to replace the battery of the Piaggio Vespa GTS 125, you need to loosen the screws that secure the panel covering the footrest compartment o…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos