|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa Px 125
You can replace the front brake pads on the Piaggio Vespa PX 125 by first removing the wheel from its housing: it can be detached from the bottom of the front fork by loosening the side nuts that secure the wheel's central axle. Once the wheel is removed from its seat, loosen the screws that secure the brake caliper to the corresponding disc: once the caliper is removed, proceed to slide out the pads inside it, insert the new ones, and reassemble the caliper.
Posted on 3 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa Px 125
To replace the front brake pads on the Vespa PX 125, loosen the screws that secure the wheel to its housing so that it can be completely removed. Aft…
Vespa Px 125
In order to replace the rear brake shoes of the Piaggio Vespa PX 125, you need to loosen the screws that secure the rear wheel to the corresponding s…
Vespa Px 125
In order to replace the rear brake shoes of the Piaggio Vespa PX 125, you need to loosen the screws that secure the rear wheel to the corresponding h…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.166
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |