Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Carburettor on a Piaggio Free 50

Model: Piaggio Free 50
Part: Carburetor

Video tutorial

Today, thanks to the following video tutorial, you will learn how to replace the carburettor on a Piaggio Free 50 independently. Start the replacement by removing the air filter box using a 12 mm spanner.

Using a cable release, detach the throttle cable and unscrew the bolt that holds the manifold to the carburettor. Then, remove the carburettor.

Insert the new carburettor and reattach the throttle cable box; using a pin, adjust the slide and fit the piece. Connect the carburettor and the throttle cable box to the manifold.

Refit the air filter box and start the scooter to test its operation.


Posted on 29 March 2026 by ScegliAuto


Related tutorials

How to Remove the Carburettor from the Piaggio Si
How to Remove the Carburettor from the Piaggio Si
Si This guide shows you how to remove and replace the carburettor on the Piaggio Si, as well as on the Ciao, Bravo, and Garelli. First, place the motorc…
How to Dismantle, Clean, and Reassemble the Carburettor of the Piaggio Vespa PK 50
How to Dismantle, Clean, and Reassemble the Carburettor of the Piaggio Vespa PK 50
Vespa Pk 50 In this guide, we will see the instructions that will allow us to dismantle, clean, and reassemble the carburettor of the Piaggio Vespa PK 50. Place …
How to Change the Carburettor on the Piaggio Ciao, Bravo, Si, Garelli
How to Change the Carburettor on the Piaggio Ciao, Bravo, Si, Garelli
Ciao In this video tutorial, you will see the main steps on how to remove and replace the original carburettor of the Piaggio Ciao, as well as the Si, Bra…

How to Replace the Starter Motor on a Derbi Senda 125?

To replace the starter motor on a Derbi Senda 125, you need to unscrew the bolts securing the cover located on the right side of the bike, under which the clutch is also found. Once the cover is removed, you will locate the starter motor at the top left relative to the clutch. By unscrewing the nuts that secure it in place, you can free it from its housing to insert a new replacement part. After the replacement, reattach the cover, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos