Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Piaggio Zip

Model: Piaggio Zip
Part: Brake pads

Video tutorial

You can replace the front brake pads on a Piaggio Zip by unscrewing the screws that secure the front brake caliper to its housing on the back of the disc: once the caliper is fully released, you can remove the pin that holds the pads in their housing to slide them out. Once the new pads are inserted, you can secure them with the pin: you can now reinstall the caliper onto the disc, securing it with the screws and checking that everything is functioning.


Posted on 26 August 2026 by ScegliAuto


Related tutorials

Replacing the front brake pads on a Piaggio Zip
Replacing the front brake pads on a Piaggio Zip
Zip These brief and simple steps will show you how to change the front brake pads on a Piaggio Zip scooter. First, place the scooter on its centre stand …
Where are the fuses of the Piaggio Zip located?
Where are the fuses of the Piaggio Zip located?
Zip All fuses of the Piaggio Zip are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be po…
How to Replace the Air Filter on a Piaggio Zip
How to Replace the Air Filter on a Piaggio Zip
Zip You can replace the air filter on a Piaggio Zip by loosening the screws that secure the cover panel of the box to its housing: this will be located n…

How to Change the Engine Oil in a Piaggio Vespa GTS 125 Scooter

In this tutorial, see how to change the engine oil in a Piaggio Vespa GTS 125 scooter, an extremely simple and quick operation. First, ensure the engine is sufficiently cool, then position a container underneath the scooter, locate the drain plug, and unscrew it using a 24mm socket spanner. Allow all the oil in the system to drain out, remove the secondary filter, and clean it of any dirt residue. At this point, simply unscrew the main filter, tighten the replacement, reassemble everything, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos