|
Do it yourself
| |||
| ||||
Model: Piaggio Zip
These short and simple steps will show us how to change the front brake pads of the Piaggio Zip scooter. First, we put the scooter on the center stand and start unscrewing the fastening screws of the front brake caliper; we remove the safety clip and press on the caliper piston to retract it, as shown in the video. At this point, we remove the old brake pads and clean the caliper from any residual dirt; then we install the new front brake pads, following the reverse procedure!
Posted on 9 November 2024 by ScegliAuto
Video tutorial
Related tutorials
Zip
You can replace the front brake pads on a Piaggio Zip by unscrewing the screws that secure the front brake caliper to its housing on the back of the …
Zip
All fuses of the Piaggio Zip are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be po…
Zip
You can replace the fork on the Piaggio Zip by loosening the screws that secure the front panel of the scooter and also those that secure the front w…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.126
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |