Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on the Piaggio Vespa GTV 300

Model: Piaggio Vespa Gtv 300
Part: Headlight

Video tutorial

In this guide, we will discover the instructions on how to remove and replace the front headlight on the fender of the Piaggio Vespa GTV 300. First, place the scooter on the centre stand and begin unscrewing the screw located at the back of the headlight; then disconnect the electrical connector of the bulbs to remove it, as shown in the video.

At this point, replace the dipped beam of the front headlight, replacing the entire optical unit if necessary; install it correctly on the fender, checking the correct operation and adjusting the height if necessary.


Posted on 29 October 2026 by ScegliAuto


Related tutorials

Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Vespa Gtv 300 Today's instructions will show you the procedure to disassemble and replace the headlamp bulb on a Piaggio Vespa GTV 300. First, place your scooter o…
How to reset the service on the Piaggio Vespa GTV 300 scooter?
How to reset the service on the Piaggio Vespa GTV 300 scooter?
Vespa Gtv 300 In this tutorial, you will see how to reset the service on the Piaggio Vespa GTV 300 scooter, an extremely simple and quick operation to be performed…
How to set the time on the Piaggio Vespa GTV 300
How to set the time on the Piaggio Vespa GTV 300
Vespa Gtv 300 The information provided in this guide will show us how to set the time on the display of the instrument panel of the Piaggio Vespa GTV 300. First, w…

How to Replace the Front Brake Pads on a BMW K75?

To replace the front brake pads on a BMW K75, loosen the screws that secure the brake caliper to the corresponding disc so that you can slide out the pin and detach the caliper. Once the caliper is detached, you can remove the existing pads to fit the new ones. After inserting the new pads, reinsert the pin and position the caliper onto the disc. Secure it with the appropriate screws, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos