Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the Piaggio Vespa GTV 300 scooter?

Model: Piaggio Vespa Gtv 300
Part: Service warning light

Video tutorial

In this tutorial, you will see how to reset the service on the Piaggio Vespa GTV 300 scooter, an extremely simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "MODE" button located below the handlebars while simultaneously turning on the instrument cluster.

Keep the button pressed until the display shows the reset message, restart the ignition and check that the procedure has been successful.


Posted on 11 May 2026 by ScegliAuto


Related tutorials

How to Check and Replace the Coolant in the Piaggio Vespa GTV 300
How to Check and Replace the Coolant in the Piaggio Vespa GTV 300
Vespa Gtv 300 In today's video, you will learn how to check and replace the coolant in the Piaggio Vespa GTV 300 scooter. First, place your scooter on the centre s…
Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Vespa Gtv 300 Today's instructions will show you the procedure to disassemble and replace the headlamp bulb on a Piaggio Vespa GTV 300. First, place your scooter o…
How to set the time on the Piaggio Vespa GTV 300
How to set the time on the Piaggio Vespa GTV 300
Vespa Gtv 300 The information provided in this guide will show us how to set the time on the display of the instrument panel of the Piaggio Vespa GTV 300. First, w…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos