Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Piaggio Vespa GTV 300

Model: Piaggio Vespa Gtv 300
Part: Clock

Video tutorial

The information provided in this guide will show us how to set the time on the display of the instrument panel of the Piaggio Vespa GTV 300. First, we put the scooter on the stand and start up the instrument panel; then we go to the settings menu, using the mode button located on the right side of the handlebar, and scroll through the options until we reach the one for setting the time, as shown in the video.

At this point, we set the hour and minutes, and if necessary, also the time format; we exit the setting to save the changes made!


Posted on 7 July 2025 by ScegliAuto


Related tutorials

Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Vespa Gtv 300 Today's instructions will show you the procedure to disassemble and replace the headlamp bulb on a Piaggio Vespa GTV 300. First, place your scooter o…
Replacing the Front Headlamp Bulb on a Piaggio Vespa GTV 300
Replacing the Front Headlamp Bulb on a Piaggio Vespa GTV 300
Vespa Gtv 300 In a few simple steps, we will see how to disassemble and replace the front headlamp bulb on the Piaggio Vespa GTV 300 scooter. First, place it on th…
How to reset the service on the Piaggio Vespa GTV 300 scooter?
How to reset the service on the Piaggio Vespa GTV 300 scooter?
Vespa Gtv 300 In this tutorial, you will see how to reset the service on the Piaggio Vespa GTV 300 scooter, an extremely simple and quick operation to be performed…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos