Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a Piaggio Vespa GTV 300

Model: Piaggio Vespa Gtv 300
Part: Headlight bulb

Video tutorial

In a few simple steps, we will see how to disassemble and replace the front headlamp bulb on the Piaggio Vespa GTV 300 scooter. First, place it on the central stand and start by removing the front light from the mudguard by unscrewing the rear screw; then disconnect the electrical connector of the bulb, as shown in the video.

At this point, release the metal clip to remove the dipped beam bulb, replacing it with a new one (of the correct type and with the same fitting); then reassemble the optical unit and check its operation!


Posted on 6 March 2026 by ScegliAuto


Related tutorials

Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Vespa Gtv 300 Today's instructions will show you the procedure to disassemble and replace the headlamp bulb on a Piaggio Vespa GTV 300. First, place your scooter o…
How to Replace the Front Headlight on the Piaggio Vespa GTV 300
How to Replace the Front Headlight on the Piaggio Vespa GTV 300
Vespa Gtv 300 In this guide, we will discover the instructions on how to remove and replace the front headlight on the fender of the Piaggio Vespa GTV 300. First, …
How to reset the service on the Piaggio Vespa GTV 300 scooter?
How to reset the service on the Piaggio Vespa GTV 300 scooter?
Vespa Gtv 300 In this tutorial, you will see how to reset the service on the Piaggio Vespa GTV 300 scooter, an extremely simple and quick operation to be performed…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos