Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video, you will learn how to check and replace the coolant in the Piaggio Vespa GTV 300 scooter. First, place your scooter on the centre stand and remove the plastic cover located under the instrument panel on the right to access the coolant reservoir. Check the level, which should always be at the maximum mark. Next, unscrew the bleed screw found on the water pump casing, allowing the fluid to drain into a container, and finally pour in the new coolant!

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb on a Piaggio Vespa GTV 300
Replacing the Front Headlamp Bulb on a Piaggio Vespa GTV 300
Vespa Gtv 300 In a few simple steps, we will see how to disassemble and replace the front headlamp bulb on the Piaggio Vespa GTV 300 scooter. First, place it on th…
How to reset the service on the Piaggio Vespa GTV 300 scooter?
How to reset the service on the Piaggio Vespa GTV 300 scooter?
Vespa Gtv 300 In this tutorial, you will see how to reset the service on the Piaggio Vespa GTV 300 scooter, an extremely simple and quick operation to be performed…
Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300
Vespa Gtv 300 Today's instructions will show you the procedure to disassemble and replace the headlamp bulb on a Piaggio Vespa GTV 300. First, place your scooter o…

How to Dismantle the Engine of the GasGas EC 125?

The operation of dismantling the engine of the GasGas EC 125 is carried out by accessing the central part of the bike immediately under the seat. To remove it from its housing, unscrew the screws and disconnect the appropriate connectors. Once the engine has been extracted, you can separate the two half-cases that comprise it by unscrewing the fixing bolts. This will allow access to the clutch, which can be completely removed by sliding out all the discs; it will also be possible to detach the piston from the corresponding connecting rod after removing the cylinder.

Watch the video!


by ScegliAuto

More videos