Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch on a Piaggio Vespa PX 125?

Model: Piaggio Vespa Px 125
Part: Clutch

Video tutorial

You can replace the clutch on a Piaggio Vespa PX 125 by loosening the screws that secure the side cover panel of the rear wheel on the right side of the scooter: once this panel has been removed, proceed to loosen the screws that secure the transmission casing to locate the underlying clutch.

The clutch can now be released from the screws that hold it in place, extracting all the discs inside: once the clutch has been removed, you can position the new discs in their respective slots to secure them and then cover everything with the casing.


Posted on 3 November 2026 by ScegliAuto


Related tutorials

How do you replace the clutch of the Piaggio Vespa PX 125?
How do you replace the clutch of the Piaggio Vespa PX 125?
Vespa Px 125 To remove the clutch of the Piaggio Vespa PX 125, you need to loosen the screws that secure the clutch cover: this will be located on the engine bloc…
How do you replace the clutch of the Piaggio Vespa PX 125?
Vespa Px 125 In order to replace the clutch of the Piaggio Vespa PX 125, you need to loosen the screws that secure the engine transmission coupling cover, which i…
How to Replace the Clutch Cable on a Piaggio Vespa PX 125
How to Replace the Clutch Cable on a Piaggio Vespa PX 125
Vespa Px 125 To replace the clutch cable on a Piaggio Vespa PX 125, loosen the bolt located at the lever on the left side of the handlebar, which is also connecte…

How to Change the Engine Oil of a KTM DUKE 390?

To change the engine oil of the KTM Duke 390, start by briefly warming up the engine to help the old oil flow out. Turn off the bike and place it on a stable stand to prevent it from tipping. Locate the oil drain plug at the bottom of the engine. Using a spanner, unscrew the plug and collect the used oil in a suitable container. Allow the fluid to drain completely for a few minutes, ensuring no residue remains in the engine. Once drained, securely reattach the drain plug. Now, locate the oil filler cap on the side of the engine, remove it, and add the new oil specific to your Duke 390. Pour it slowly and check the level with the dipstick or gauge until you reach the correct amount, ensuring you do not exceed the recommended level. After completing the operation, close the filler cap, start the engine for a moment, and then turn it off again to check for any leaks or drops in level.

Watch the video!


by ScegliAuto

More videos