Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Ciao
    4. : Piaggio hub oil change Ciao

Model: Piaggio Ciao
Part: Wheel
Piaggio hub oil change Ciao

For this maintenance it is recommended to use "Motul Gear 80/90" oil. It is also advisable to remove the wheel and keep it tilted, perhaps leaning against the wall, to prevent the lubricant from escaping. With a slotted screwdriver, unscrew the single screw on the hub, freeing the hole from which to insert the oil. Press the container slowly to let the lubricant out, but slowly. Change the screw seal every time you change the hub oil. Replace the screw with the new gasket and tighten it firmly, to prevent it from loosening over time with vibrations.


Posted on 21 December 2023 by ScegliAuto



How to make the 2% mixture for your Piaggio Ciao
Ciao How do you make the mixture for an old moped Hello Piaggio, now that petrol stations no longer have the mixture column? And then: what is the mixture
How to remove the rear luggage rack of a Piaggio Ciao
Ciao Before we can start, we will have to go and place our Piaggio Ciao on the central stand. So let's start by unscrewing and removing the bolts that sec
How to change the throttle wire on the Piaggio Ciao
Ciao Let's see in this video how to remove and replace the accelerator wire on the Piaggio Ciao, but also on the Si and Bravo. First we go to remove the p

How do you disassemble the engine of the Derbi Senda 50?

In order to disassemble the engine of the Derbi Senda 50 it is necessary to completely disassemble the device, removing the side panels and extracting it from its housing after the connectors have been disconnected. Once the engine has been extracted, it will be necessary to unscrew the screws that secure the two crankcase halves in order to remove them and access the internal components. It will be necessary to remove the ring that fixes the piston to its connecting rod and you can also loosen the bolts that fix the clutch; in this way it will be possible to insert the new components and re-install the engine.

Watch the video!


by ScegliAuto

More videos