Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Start the scooter's engine for a few minutes to warm the oil, making it more fluid. As shown in the video, unscrew the lower drain plug and collect the used oil in a container. It is advisable to open the upper fill hole immediately to avoid a vacuum and facilitate the outflow of the lubricant. While the oil drains, change the corresponding filter by simply unscrewing and removing it. Before inserting the new filter, remember to lubricate its O-ring using some of the old oil. Tighten the lower hole and insert the new lubricant through the fill hole.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for Piaggio Beverly 250
Engine Oil and Oil Filter Replacement for Piaggio Beverly 250
Beverly 250 In this brief and simple guide, learn how to perform the routine maintenance service by replacing the engine oil and oil filter on the Piaggio Beverl…
How to Change the Engine Oil on a Piaggio Beverly
How to Change the Engine Oil on a Piaggio Beverly
Beverly 250 In this brief guide, see how to change the engine oil on your Piaggio Beverly 250. It is not a very complex operation; just take some care, and you c…
How to Change the Engine Oil in a Piaggio Beverly 250 Scooter?
How to Change the Engine Oil in a Piaggio Beverly 250 Scooter?
Beverly 250 In this tutorial, you will see how to change the engine oil in a Piaggio Beverly 250 scooter, a very simple and quick operation. First, ensure that t…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos