Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Yamaha YBR 125?

Model: Yamaha Ybr 125
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Yamaha YBR 125, loosen the bolts securing it to its housing at the rear of the bike, right next to the rear wheel: once the support bolts are loosened, you can proceed to widen the clamp that connects the exhaust to the remaining part of the exhaust pipe; once the old exhaust is removed, you can insert the new one. The new exhaust can be connected to the pipe with the appropriate clamp and secured laterally with the corresponding bolts.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to Dismantle the Rear Wheel of a Yamaha YBR 125
How to Dismantle the Rear Wheel of a Yamaha YBR 125
Ybr 125 Below are the instructions that will allow you to dismantle and remove the rear wheel of the Yamaha YBR 125. First, place the bike on a stand and sta…
How to Replace the Clutch on a Yamaha YBR 125?
How to Replace the Clutch on a Yamaha YBR 125?
Ybr 125 To replace the clutch on the Yamaha YBR 125, loosen the screws securing the cover located on the right side of the bike at the front. Once the cover …
How to Replace the Brake Light Bulb on a Yamaha YBR 125?
How to Replace the Brake Light Bulb on a Yamaha YBR 125?
Ybr 125 Replacing the brake light bulb on the Yamaha YBR 125, as shown in this tutorial, is an extremely simple and quick task. Before proceeding, ensure tha…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos