Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Piaggio Beverly 250 Scooter?

Model: Piaggio Beverly 250
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in a Piaggio Beverly 250 scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath, open the filler cap, and with a 24mm socket, unscrew the drain bolt.

Allow all the oil in the system to drain out, unscrew the old filter using a strap, and tighten both the new filter and the bolt. At this point, simply pour in the new oil through the designated upper hole.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for Piaggio Beverly 250
Engine Oil and Oil Filter Replacement for Piaggio Beverly 250
Beverly 250 In this brief and simple guide, learn how to perform the routine maintenance service by replacing the engine oil and oil filter on the Piaggio Beverl…
How to Replace the Voltage Regulator on the Piaggio Beverly 250 - 500
How to Replace the Voltage Regulator on the Piaggio Beverly 250 - 500
Beverly 250 This guide will show you the steps to remove and replace the voltage regulator on the Piaggio Beverly 250 scooter, as well as the 500; the regulator …
How to Replace the Fuel Filter on Piaggio Beverly 250
How to Replace the Fuel Filter on Piaggio Beverly 250
Beverly 250 In this video, you will see how to remove and replace the fuel filter on a Piaggio Beverly 250 scooter in simple and quick steps. First, place the sc…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos