Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Voltage Regulator on the Piaggio Beverly 250 - 500

Model: Piaggio Beverly 250

Video tutorial

This guide will show you the steps to remove and replace the voltage regulator on the Piaggio Beverly 250 scooter, as well as the 500; the regulator replacement is necessary when the battery is charged at a voltage higher or lower than specified, damaging it consequently.

First, place your scooter on the centre stand and begin by removing the right side panel; to do this, unscrew the fixing screws of the footboard and remove the rear light, as shown in the video.

Then disconnect the wiring of the voltage regulator and unscrew its screws to remove it and replace it with the new one!


Updated on 14 July 2026 by ScegliAuto


Related tutorials

Replace the Front Headlamp Bulb on Piaggio Beverly 250
Replace the Front Headlamp Bulb on Piaggio Beverly 250
Beverly 250 .. Beverly 250 scooter, as well as the 125 and 500 models. First, remove any visor or windscreen by unscrewing the bracket screws; then remove the.. …
How to Replace the Exhaust of the Piaggio Beverly 250?
How to Replace the Exhaust of the Piaggio Beverly 250?
Beverly 250 To replace the exhaust of the Piaggio Beverly 250, you need to loosen the screws that secure it to the housing on the right side of the bike, near th…
Engine Oil and Oil Filter Replacement for Piaggio Beverly 250
Engine Oil and Oil Filter Replacement for Piaggio Beverly 250
Beverly 250 In this brief and simple guide, learn how to perform the routine maintenance service by replacing the engine oil and oil filter on the Piaggio Beverl…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos