Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Headlamp Bulb on Piaggio Beverly 250

Model: Piaggio Beverly 250
Part: Headlight bulb

Video tutorial

In this video, learn how to remove and replace the front headlamp bulb on a Piaggio Beverly 250 scooter, as well as the 125 and 500 models. First, remove any visor or windscreen by unscrewing the bracket screws; then remove the brackets.

Next, unscrew the fixing screws located under the front fairing of the headlamp and remove the side covers; then unscrew the additional screws underneath to access the instrument cluster and reach the headlamp. Finally, disconnect the electrical connector of the bulb and replace it with a new one of the correct type (in this case, H4 type)!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Replacing Front Bulbs on Piaggio Beverly 250
Replacing Front Bulbs on Piaggio Beverly 250
Beverly 250 Lower the plastic cover under the handlebar (on the driver's side) and unscrew all the fixing screws of the front headlamp. Once done, remove the hea…
How to Replace the Voltage Regulator on the Piaggio Beverly 250 - 500
How to Replace the Voltage Regulator on the Piaggio Beverly 250 - 500
Beverly 250 This guide will show you the steps to remove and replace the voltage regulator on the Piaggio Beverly 250 scooter, as well as the 500; the regulator …
How to Access the Underseat Compartment on Piaggio Beverly 250
How to Access the Underseat Compartment on Piaggio Beverly 250
Beverly 250 If you only need to access the underseat compartment of your Piaggio Beverly 250, simply insert the key into the side slot and turn it. The seat will…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos