Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Lower the plastic cover under the handlebar (on the driver's side) and unscrew all the fixing screws of the front headlamp. Once done, remove the headlamp from its housing and disconnect the connector. Now that you have the headlamp free, position it on a workbench and remove the rubber cover from the relevant bulb. Disconnect the bulb's connector and open the metal clip, remove the bulb and insert the new one you purchased. Proceed in reverse until fully reassembled, then check its proper functioning.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Piaggio Beverly
How to Replace the Front Brake Pads on the Piaggio Beverly
Beverly 250 In this video tutorial, you will see how to remove and replace the front brake pads on the Piaggio Beverly 125 and 250 scooter. First, place the scoo…
Engine Oil and Oil Filter Replacement for Piaggio Beverly 250
Engine Oil and Oil Filter Replacement for Piaggio Beverly 250
Beverly 250 In this brief and simple guide, learn how to perform the routine maintenance service by replacing the engine oil and oil filter on the Piaggio Beverl…
How to Access the Underseat Compartment on Piaggio Beverly 250
How to Access the Underseat Compartment on Piaggio Beverly 250
Beverly 250 If you only need to access the underseat compartment of your Piaggio Beverly 250, simply insert the key into the side slot and turn it. The seat will…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos