Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide will show you how to bleed and top up the engine coolant of the BMW R1250 GS motorcycle. First, place the bike on its centre stand and start unscrewing the coolant bleed screw, allowing the fluid to drain into a container for about ten minutes; then, remove the coolant reservoir and drain any excess fluid. At this point, top up with the new coolant suitable for your radiator, filling it to the maximum level mark!

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of a BMW R1250 GS?
How to Replace the Remote Battery of a BMW R1250 GS?
R1250 Gs In this tutorial, you will learn how to replace the remote battery of a BMW R1250 GS, a very simple and quick operation. For this, you will need a re…
How to Replace the Remote Battery on a BMW R1250 GS?
How to Replace the Remote Battery on a BMW R1250 GS?
R1250 Gs In this tutorial, we will see how to replace the remote battery on a BMW R1250 GS, a very simple and quick operation. For this, you will need a small…
How to Replace the Remote Battery on the BMW R1250 GS
How to Replace the Remote Battery on the BMW R1250 GS
R1250 Gs As shown in this tutorial, replacing the remote battery on the BMW R1250 GS is a very simple and quick operation. For this, you will need a replaceme…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos