Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If your Vespa Px 125 is leaking petrol from the carburettor, first close the petrol tap. Unscrew the cross-head screws and remove the carburettor cover. First, take off the air filter (while you're at it, give it a clean), then loosen the screws of the carburettor and remove the throttle air gears. Now finish unscrewing the carburettor pins and extract it. Keep the pins and washers organised. Clean the carburettor with petrol while wearing nitrile gloves and also disassemble the small gaskets and the small central filter. Reassemble everything.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Carburettor from the Piaggio Vespa PX 125 - PX 200
How to Remove the Carburettor from the Piaggio Vespa PX 125 - PX 200
Vespa Px 125 Follow the instructions below to remove the carburettor from the Piaggio Vespa PX 125, as well as the PX 200. First, put the central stand down and s…
How to Adjust the Carburettor of the Piaggio Vespa PX 125?
How to Adjust the Carburettor of the Piaggio Vespa PX 125?
Vespa Px 125 To adjust the carburettor of the Piaggio Vespa PX 125, locate the bolt at the rear of the carburettor. Here, you will be able to tighten the bolt wit…
How to Remove the Carburettor on Vespa PX 125 - LML Star 125 2T
How to Remove the Carburettor on Vespa PX 125 - LML Star 125 2T
Vespa Px 125 Watch this video for the main steps to remove and replace the original carburettor on a Vespa PX 125, as well as on the LML Star 125 2-stroke. First,…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos