|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa Px 125
Watch this video for the main steps to remove and replace the original carburettor on a Vespa PX 125, as well as on the LML Star 125 2-stroke. First, remove the engine-side storage box; then remove the top cover of the carburettor by unscrewing the screws with a screwdriver. Next, unscrew the fuel filter screw to disconnect the pipe, and also disconnect the air intake manifold. Now use a socket spanner to unscrew the fixing screw of the carburettor so that you can extract it, as shown in the video!
Updated on 3 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa Px 125
In today's tutorial, you will learn how to remove and replace the air filter of the carburettor on the Piaggio Vespa PX 125, as well as the LML Star …
Vespa Px 125
In this video tutorial, you will learn how to remove the engine from the bodywork of the Piaggio Vespa PX 125 and the LML Star 125. First, place the …
Vespa Px 125
In today's tutorial, you will learn how to dismantle and replace the fuel tap on the Piaggio Vespa Px 125, as well as the Lml Star. First, lift the r…
|
How to Change the Engine Oil on a Beta RR 125?
To change the engine oil on a Beta RR 125, loosen the drain plug located at the bottom centre of the bike. Once removed, collect all the used oil in a suitably positioned container. After the oil has completely drained, remove the oil filter next to the drain plug to replace it with a new part. Now, refill by adding the necessary amount of oil through the hole on the right side of the engine casing. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.058
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
